The kitchen water hose and bathroom faucet are used more frequently, so they are easier to break, and water leakage often occurs. What about a leaky faucet in the kitchen? Do you know how to fix this? Kitchen faucet leakage is a more complex problem, if the solution is not good, there will often be water leakage. So, what about a leaky kitchen faucet? Is there a solution?

In order to solve the problem of kitchen faucet water leakage, we must first check the cause of water leakage, then what are the reasons that will lead to kitchen faucet water leakage, Xiaobian gives you a summary, there are about three reasons:

1. Water outlet leakage: it is due to the wear of the shaft gasket in the faucet. Use pliers to loosen the gland bolt and remove it, take out the shaft gasket with the clamp, and replace it with a new shaft gasket.

2. Water leakage in the lower gap of the faucet bolt: it is caused by the wear of the triangle gasket in the gland. You can loosen the screw to remove the bolt head, then loosen the gland to remove, and then remove the inner triangle seal of the gland and replace it with a new one.

3. Water leakage at the nozzle joint: basically, the cap nut is loose, at which time you can re-fasten the cap nut or replace it with a new U-shaped gasket.

How to solve the kitchen faucet leak? 6 repair steps easily solved

Step 1:

Close the water inlet valve. Remove the small screws above or behind the faucet handle to remove the handle secured to the faucet body. Some screws are hidden under metal buttons, plastic buttons, or plastic sheets that snap or screw into the handle. Just open the button and you will see the handle screw on the top. If necessary, use a penetrant lubricant like WD-40 to loosen the screws.

Step 2:

Remove the handle and look at the parts of the faucet. Remove the packing nut with a large carp pliers or an adjustable wrench, being careful not to leave a scratch on the metal. Twist the spool or shaft in the same direction that you turned it when you opened the faucet to unscrew them.

Step 3:

Remove the screws holding the washer in place. If necessary, use penetrant oil to loosen the screws. Check screws and spool and replace with new ones if damaged.

Step 4:

Replace the old washer with an identical new one. A new washer that matches the old one almost exactly will generally keep the faucet from dripping. You should also note whether the old gasket has a bevel or flat surface, and replace it with the same new gasket. Washers designed for cold water only expand violently when hot water flows through them, blocking the outlet and slowing the flow of hot water. Some washers will work in hot and cold water, but you want to make sure that the washer you buy for replacement is identical to the original.

Step 5:

Attach the new washer to the spool and reinstall the components in the faucet. Turn the spool clockwise. With the spool in place, reinstall the packing nut. Be careful not to scratch the metal with the wrench.

Step 6:

Reinstall the handle and put the button or disc back on. Turn the water supply back on and check for leaks.

The above is the content introduced by Xiaobian. I believe that friends have a certain understanding of the causes of faucet leakage and maintenance methods. I hope this article can help you.